Disassembly And Reassembly; Removing The Rear Cover Panels - Samsung NX58H5600SS/AA Service Manual

3. Disassembly and Reassembly

3-1 Removing the Rear Cover Panels

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating the range. Failure to do
so can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
operating the range. Replace all panels before operating the range. Failure to do so can result in death or
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Cover-Wire
LT/RT
Cover-Back
Guard Wire
Cover-
Convection
Cover-Wire LT Cover-Wire RT
Cover-Back Guard Wire
Cover-Convection
1. Turn off the electrical supply going
to the range.
2. Shut off the gas shut-off valve in
the gas supply line to the range.
3. Pull the range away from the wall
so that you can access the rear
panel.
4. Remove 2 screws from the Cover
Wire LT/RT and pull out the cover
5. Remove 2screws from the cover
and pull out the cover from the
upper back of the range
6. Remove 3screws from the cover
and pull out the cover from the
range.
11