Table of Contents
Advertisement
4.8 Memory management
4.8.1 Storing a reading
There are 20 files (F00-F19) which can be used to store the measurement values
inside the instrument.
At most 100 records (thickness values) can be stored in each file. The measured
thickness value will be saved to the current file by pressing the
measurement reading appears. It will be added as the largest record of the file.
To change the destination file to store the measured values, the following steps are
to be carried out:
1) The key
is to be pressed to activate the data logging functions. The current file
name and the total record count of the file will be displayed.
2) The key
and the key
current file.
3) The key
has to be pressed to exit the data logging functions any time wanted.
4.8.2 Clearing a selected file
It may be required to clear the contents of an entire file completely of all measure-
ments. With this a new list of measurements can be stared, beginning with L00.
The procedure is outlined in the following steps:
1) The key
is to be pressed to activate the data logging functions. The current
file name and the total record count of the file will be displayed.
2) The key
and the key
of all measurements.
3) The
key has to be pressed on the desired file. The file will be automatically
cleared and display "-DEL".
4) The key
has to be pressed to exit the data logging functions any time as
wanted to return to the measurement mode.
4.8.3 Viewing/ deleting stored records
With this function a record can be viewed/ deleted in a desired file previously saved
in memory, following these steps:
1) The key
is to be pressed to activate the data logging functions. The current file
name and the total record count of the file will be displayed.
2) The key
and the key
3) The
key has to be pressed to enter the selected file.
The current record number will be displayed (i.e. L012) and as well the record con-
tents.
4) The key
and the key
5) The
key has to be pressed on the desired record.This record will be
automatically deleted and "-DEL" is displayed.
6) The key
has to be pressed to exit the data logging functions to return to the
measurement mode.
14
have to be used to select the desired file to set as
have to be used to scroll to the file that shall be cleared
have to be used to select the desired file.
have to be used to select the desired record.
key after a new
TN_US-BA-e-1814
Advertisement
Table of Contents
