Capacities And Specifications Of The 108 Flex-Auger® Feed Delivery System - Chore-Time FLEX-AUGER 108 Installation And Operator's Manual

General
Capacities and Specifications of the 108 FLEX-AUGER
System
The Model 108 FLEX-AUGER
and steel tubes should not be mixed in a system.
DO NOT USE PVC AUGER TUBING WITH FEEDS CONTAINING CALCIUM. The steel auger tubes should
be used for feeds with calcium.
The Model 108 FLEX-AUGER
per minute (100 kg per minute), or 13,200 pounds per hour (6,000 kg per hour). A high capacity Model 108 system
may be ordered for applications requiring up to 250 pounds per minute (113 kg per minute). The maximum
recommended running time per day is 4 hours.
*Carrying capacities are based on feed density of 40 pounds per cubic foot or 640 kg per cubic meter.
The Model 108 is designed to carry feeds such as mash, crumbles, shelled corn, high moisture corn, or pellets up
to approximately 3/16" x 1/2" (4.7 x 12.7 mm) in size. Applications other than conveying poultry and livestock
rations will void the warranty.
Adequate support must be provided to prevent the tubes from sagging and support the weight of the Control Unit.
The auger, tubes, and feed weigh approximately 8 lbs/ft. (12 kg/m). The Control Unit weighs approximately 100
lbs. (45 kg).
MAXIMUM MOISTURE CONTENT OF CORN FOR THE MODEL 108 FLEX-AUGER
MAXIMUM MOLASSES CONTENT IS 2%.
6
®
Feed Delivery System is available with either PVC or steel auger tubes. PVC
®
Feed Delivery System has an approximate conveying capacity* of 220 pounds
Model 108 FLEX-AUGER® Feed Delivery System
®
Feed Delivery
®
IS 27%.
MA1714C