Troubleshooting And Remedies; Rotary Mulcher - Agria 9600-112 Translation Of The Original Operating Instructions

6 Troubleshooting and Remedies

6 Troubleshooting and Remedies
Observe the safety instructions! Faults on the machine or on the engine
that make a major intervention necessary must always be repaired by a specialist
agria workshop that have the necessary tools. Incorrect intervention will only lead to
damage.

Rotary mulcher

Fault
Blade shaft does
not turn
The crawler tracks
do not move when
the joystick is
operated
The crawler tracks
run more slowly
than they should
The mowing deck
cannot be raised
64
Possible cause
V-belt of blade drive too loose Re-tension V-belt
V-belt of blade drive defective Replace V-belt
Blade blocked by foreign
object
Cable to clutch defective
Clutch defective
Crawler tracks are blocked by
grass residues or other for-
eign objects
Wiring on electric motors
defective
Wiring on generator defective
Traction drive control unit off
due to low engine speed
Crawler tracks are hampered
by grass residues or other
foreign objects
Linear drive defective
Foreign objects on
the mowing deck
Wiring to linear drive defective Check wiring and replace if
Remote-controlled High Grass Rotary Mulcher agria 9600-112
Remedy
Remove foreign object
Check wiring and replace if
necessary
Replace clutch
Remove residues or blockage
Check wiring and replace if
necessary
Check wiring and replace if
necessary
New start of the remote control
and the machine, engine speed
to full speed.
Remove residues or blockage
Repair or replace linear drive
Remove foreign object
necessary
Page
56
56
61
39
61
27