Firmware Upgrade Procedure - FlexRadio Systems Tuner Genius XL User Manual

9 Firmware Upgrade Procedure

The Tuner Genius XL Windows Utility can be used to upgrade the firmware in your Tuner Genius XL over the
network. First, start the utility program and connect to the tuner.
1. Click the configuration icon (gear) and select the Firmware Upgrade button. The Tuner Genius XL
Firmware Upgrade dialog will appear:
Note that the program has filled in the path and filename to the firmware image associated
with the Utility program.
2. Click the UPGRADE button to start the firmware upgrade process.

The TGXL microprocessor will enter the boot loader.

The firmware image will be transferred over the network to the tuner.

The tuner will reboot.

When the firmware transfer is complete, a status dialog will be shown.
3. Click the OK button to close the notification dialog
4. Close the Firmware Upgrade dialog by clicking the X in the top right corner.
During the reboot, the Tuner Genius XL Windows Utility screen may show that it is connecting. After the
reboot is complete, the tuner will reconnect, enter Operate mode, and you may resume regular operation.
i – If the upgrade fails with a bootloader error on your first attempt, please press the Upgrade button again
to complete the process.
Copyright 2021 FlexRadio. All Rights Reserved.
Page 63 of 72
7 June 2021(FW:0.9.12, Utility: 0.9.12)