Table of Contents
Advertisement
7.4 Transmitting
When transmitting, the PTT indicator is illuminated, and the front panel display looks like the following:
The elements of the display are detailed in the following sections.
7.4.1 Power Meter (PWR)
The power meter indicates the transmitted peak and average power. It ranges from 0 to 2000 watts. In
addition, a maximum power indicator is shown when demanded by the limits of the tuning solution.
i – Power measurements update approximately every 100ms and should be used for reference only. For a
more accurate power reading, transmit a fixed amplitude and frequency signal for at least 1 second.
7.4.2 SWR meter
The SWR meter shows the Standing Wave Ratio (SWR) on the input port after the tuning solution. It represents
the SWR "seen" by the transmitter or amplifier.
Copyright 2021 FlexRadio. All Rights Reserved.
Page 51 of 72
7 June 2021(FW:0.9.12, Utility: 0.9.12)
Advertisement
Table of Contents
