Table of Contents
Advertisement
8.3.2 CAT/CI-V Tab
Use the CAT / CI‐V tab when a FLEX 6000 Series transceiver does not control the tuner. Choose the
transceiver's make and model connected to each of the tuner ports and the details of the communication
protocol between the radio and the tuner. A selection of radio makes and models are provided. Do not use this
tab to configure FLEX‐6000 Series transceivers. Click the Save button after the choices have been made.
8.3.3 FlexRadio Tab
Figure 8-1 A FLEX-6600M configured
for operations on Port A and ANT 1 on the Transceiver
Page 57 of 72
Copyright 2021 FlexRadio. All Rights Reserved.
7 June 2021(FW:0.9.12, Utility: 0.9.12)
Advertisement
Table of Contents
