Table of Contents
Advertisement
8.3.4 Antenna Genius Tab
The Antenna Genius tab allows the configuration of an Antenna Genius device downstream of the tuner. First,
enter the IP address and Port that the Antenna Genius uses.
8.3.5 Other Tab
Use the Other tab to adjust the front panel backlight intensity, set the per‐band bypass configuration, and the
receive mode bypasses.
Display Backlight Intensity
This control sets the brightness of the front panel display. Click Save to make a change permanent.
Copyright 2021 FlexRadio. All Rights Reserved.
Page 59 of 72
7 June 2021(FW:0.9.12, Utility: 0.9.12)
Advertisement
Table of Contents
