Table of Contents
Advertisement
7.4.3 PTT, Band and Frequency Data
This section displays information about the current port status. A red outline around the port indicates the
tuning solution that is currently applied.
1
Port
2
PTT Indicator: This label background is red when PTT is detected
3
Band Indicator: Displays the selected band
4
Frequency Source and Frequency:
band data is present, this label displays RF SENSE, indicating the port will sense the RF frequency
when the signal arrives.
5
Antenna Genius Antenna Port: Displays 1‐8 or / of not present.
6
Bypass or Operate:
7.4.4 Additional Information
This section shows the tuner's firmware version, IP address, [Address Mode], and device name.
Copyright 2021 FlexRadio. All Rights Reserved.
Displays the current frequency source and frequency. When no
Page 52 of 72
7 June 2021(FW:0.9.12, Utility: 0.9.12)
Advertisement
Table of Contents
