The Tuner Genius Xl Windows Utility; Tuner Chooser Screen - FlexRadio Systems Tuner Genius XL User Manual

8 The Tuner Genius XL Windows Utility

In addition to the tuner configuration tasks described in the previous sections, the Tuner Genius XL Windows
Utility provides several other features.

8.1 Tuner Chooser Screen

The Chooser screen is the first screen that appears after starting the Tuner Genius XL Windows Utility program.
The Local Devices tab shows a list of tuners available in your local area network (LAN). Click on a tuner to select
it, then click the Connect button to display the tuner.
The Remote Devices tab shows a list of remote tuners that have been configured for use by the utility program.
Click on a remote tuner to select it, then click the Connect button to display the tuner.
To add a remote tuner to the list, click on the + button. The screen shown below will appear. Next, fill in the
name of the remote tuner, its IP address, and the authorization code assigned to the remote tuner. Finally, click
Save to save the configuration for later use.
Page 53 of 72
Copyright 2021 FlexRadio. All Rights Reserved. 7 June 2021(FW:0.9.12, Utility: 0.9.12)