Mitsubishi Electric G-50A Instruction Book page 16

(2) G-50A operation prohibition
• The operation of this controller is prohibited when an operation prohibition setting for this controller is received
from a system controller other than this controller or when an external input signal is used.
(3) Using the function area
To select the function from the function area, use the
function of your choice and press the
screen.
• MON. (MONITOR)
• PROH. (PROHIBIT)
• COL. (COLLECTIVE)
• M (MEMORY)
• MR (MEMORY READ)
PROHI-
The is displayed and the prohibition operation is display in reverse
BITED
display when operation of this controller is prohibited by another system
controller or an external input signal used.
The prohibition operation which is displayed in reverse display is not pos-
sible to operate in this condition.
NOTE:
• If the Level Run/Stop function is controlled via an exter-
• If the Emergency Stop function is controlled via an exter-
switch. The current cursor position appears as a blinking indication on
ENTER
: Shift to the operation monitor screen.
: Shift to the prohibit setting screen.
: Shift to the collective operation setting screen.
: Stores the setting currently shown on the screen in memory.
: Reads the setting stored in memory and activates them for the currently displayed
group.
– 15 –
nal input, local operation of the Run/Stop button will be
prohibited, and the timer operation function will also be
prohibited.
nal input, local operation of the Run/Stop button during
emergency stop status will be prohibited, and the timer
operation function will also be prohibited.
or switch to move the cursor to the blinking to the