Initial Setting; Shifting To Initial Setting Menu; M-Net Address Setting - Mitsubishi Electric G-50A Instruction Book

Central controller
Hide thumbs Also See for G-50A:
Table of Contents

Advertisement

5. Initial setting

5 - 1 Shifting to initial setting menu

• Shift to the initial setting menu by continuously pressing
menu screen. (Refer to section "3-2".)
Shift to the user operation menu by continuously pressing
screen. (Refer to section "3-2".)
• When group information is not saved, the following initial setting screen is displayed when power is turned on at
this controller.

5 - 2 M-NET address setting

(1) Select
"6 ADDRESS SETTING" (or
6
(2) Set the controller address by pressing the
BACK
(3) When the
switch is pressed after setting, the screen returns.
SCREEN
MENU
6 ADDRESS SETTING
7 FUNCTION SETTING
8 IP ADDRESS SETTING
• When the controller is shipped from the factory, the address is set to "000".
(Always set the address to "000" When the K transmission converter is managed.)
NOTE:
Observe the following precautions when this controller manages the M-NET models and K control
models by using the K transmission converter (PAC-SC25KAA).
Refer to the K transmission converter instruction manual for further details.
• Address of this controller
Always set the address of this controller to "000".
• Function select setting of this controller
Always set the No.3 function setting to ON.
• Indoor unit address
Set all the M-NET models of indoor units from 001, next, set the address of the K control indoor
unit.
Indoor unit address
* Assign the address of the smallest K-control indoor unit in the group as the group number.
1
0
Press the
to select "6 ADDRESS
WED 15:29
SETTING"
Press the
switch to back
to the initial
setting menu.
001 ~ M-NET indoor unit maximum address < K control indoor unit
minimum address ~ 050
+
(2 seconds or longer) on the user operation
+
(2 seconds or longer) on the initial setting
MENU
1 ADDRESS SETTING
2 FUNCTION SETTING
3 IP ADDRESS SETTING
4 GROUP SETTING
PLEASE SET
INITIAL SETTING
"1 ADDRESS SETTING").
to
switches (000,201 ~ 250).
9
INS.
switch
6
ADDRESS SETTING
M-NET ADDRESS:
BACK
SCREEN
– 25 –
WED 15:29
000

Advertisement

Table of Contents
loading

Table of Contents