Mitsubishi Electric G-50A Instruction Book page 44

Weekly schedule setting screen
P1 ~ P4
Schedule pattern setting screen
The unit address
where the malfunction occurred
Error code
NOTE:
When there is no malfunction taking place, [NO ERROR] lights up instead of [ERROR CODE].
When operation of the G-50A is prohibited, reset operation is invalid.
Current time setting screen
22-09-2002 SUN 00:00
( D A Y - M O N T H - Y E A R )
* Repeat assign the schedule pattern to each day (and each group)
NOTE:
When the No.4 function select is set ON, P4 cannot be set.
* to of a composite pattern composed of P1 to P3 and P4.
* Repeat set schedules.
* Three types (P1-P3) of daily ON/OFF pattern and one type (P4) of
prohibition/permission pattern are available respectively, each of which
can be set for each group.
Malfunction monitor screen
The unit address
where the malfunction was detected
Move the cursor position
Set the number or day
* Set the date day, month, year and time.
Press this switch, where all setting have been completed.
* The clock count will start with the second reset to 0.
– 43 –
Change the display group.
Move the cursor to the pattern position.
Select P1 to P4 or (-)
Complete the setting.
The cursor will move to the next setting position.
Move the cursor position.
Select the ON (PROHIBITION) time or OFF
(PERMISSION) time.
(Time is changed by 10 minutes unit.)
Complete the setting. The cursor moves to the
next setting position.
Change the pages
Reset all malfunctions
or page +1
or page -1