Mitsubishi Electric G-50A Instruction Book page 18

(2) Collective prohibit setting
6 The collective prohibit setting is excused.
The collective prohibit setting takes approximately
20 seconds.
1 Press the
play and press the
ENTER
screen.
2 The collective prohibit setting initial screen is displayed.
3 Select the items to be prohibited or permitted on the collective prohibit
setting initial screen.
Each time to press the switch corresponding to the prohibition item, the
prohibition or permission is selected.
Prohibition setting: The prohibited item is displayed in reverse with
Permission setting: The permitted item is displayed with blinking.
The selection method concerning to prohibit/permit item is same as de-
scribed in section "4-2-1 (1) Local remote control operation prohibit set-
ting" (page 14).
4 The items selected for the prohibition or permission are displayed with
blinking.
And the "SET" is displayed with blinking in the function area.
5 When all setting are completed, press the
plete this settings.
7 The collective setting prohibition/permission item
8 After setting of prohibit/permit items, press the
– 17 –
switch to set "PROH. (PROHIBIT)" in blinking dis-
switch on the collective operation setting initial
blinking.
ENTER
setting is completed when the previous item light.
BACK switch to back to the collective operation set-
SCREEN
ting initial screen.
switch one time to com-