Setting Isync; Setting The Snooze Time - Silvercrest SIUR 10 A1 Operating Instructions Manual

Setting iSync

GB

Setting the snooze time

138
Abbreviation Diff erence City
SYD
NOU
AKL
♦ Touch the Set|OK control point
on the remote control again to save the current setting and to change to the
next menu item.
You can use this function to set whether the device should update the displayed
time using the device at the iPort.
Precondition: The device is in clock/standby operating mode.
♦ Touch the Set|OK control point
on the remote control 16 times.
♦ Press one of the i /i
i /i keys /
OFF
or off ( ).
♦ Touch the Set|OK control point
on the remote control again to save the current setting and to change to the
next menu item.
You can use this function to set the period for the snooze function.
Precondition: The device is in clock/standby operating mode.
♦ Touch the Set|OK control point
on the remote control 17 times.
the minute display blinks.
♦ Press the i /i control points
keys / on the remote control to set the required period between 1 and
59 minutes.
♦ Touch the Set|OK control point
on the remote control again to save the current settings and to quit the
settings menu.
+10 Sydney / Australia
+11 Noumea / New Caledonia
+12 Auckland / New Zealand
on the device or press the Set OK key
on the device or press the Set OK key
i-Sync
appears on the display
control points /
on the remote control to switch the function on (
on the device or press the Set OK key
on the device or press the Set OK key
SNOOZE
will appear on the display
/ on the device or press then i /i
on the device or press the Set OK key
.
on the device or press then
ON
SIUR 10 A1
)
, and