Note: The display, radio, alarm clock and night light do not function
in emergency mode.
Open the battery compartment
by removing the cover.
Insert two 1.5 V, AA batteries (not included in the scope of delivery)
into the battery compartment
indicated in the battery compartment
Close the battery compartment
and clicking it into place.
Establishing the power supply
Note: Before you connect the device, compare the connection
information on the type plate (voltage and frequency) with your mains
supply information. Ensure that the values correspond so that no damage
occurs to the device.
Plug the mains plug into a socket. The time (
display
.
1
VHF cable aerial
Unwind the cable aerial
Initial use
Setting the time
Note: Make sure to set the time quickly as entering the settings is
interrupted after approx. 5 seconds if a button has not been pressed. All
settings made so far will be automatically saved.
14 GB/IE
on the underside of the device
15
. Ensure correct polarity. This is
15
.
15
by placing the cover on top of it
15
completely for the VHF reception.
3
) will flash on the
Need help?
Do you have a question about the HG00708A and is the answer not in the manual?
Questions and answers