Setting The Display Illumination - Silvercrest SRD 250 A2 Operating Instructions Manual

Handling and operation
Automatic Switch-off ("SLEEP" function)
With the "Sleep" function the device switches itself off after a time
lapse of between 60 and 10 minutes.
♦ Press the
♦ Press the SLEEP button
60 minutes appears and the SLEEP-LED
pressing of the SLEEP button
by 10 minutes respectively.
♦ Repeatedly press the SLEEP button
time is shown in the display
frequency appears in the display
glows continuously.
♦ To switch off the sleep function press repeatedly the SLEEP button
until in the display

Setting the display illumination

♦ Set the DIMMER switch
the display
♦ Set the DIMMER switch
the display
♦ Set the DIMMER
play is to be set automatically dependant on the lighting
2
conditions.
SRD 250 A2
/BAND button
9
. In the display
14
is shown. The SLEEP-LED
2
to HIGH if you want the indicators in
19
to appear brighter.
2
to LOW if you want the indicators in
19
to appear darker.
2
switch to AUTO if the indicator in the dis-
19
to switch the device on.
the switch off time
2
blinks. Repeated
6
shortens the switch off time
14
until the desired switch off
14
. After a few seconds the radio
2
again and the sleep LED
2
6
,
14
goes out.
6
81
GB
MT