Display Representations; Reset To Factory State; Cleaning; Cleaning The Housing - Silvercrest SIUR 10 A1 Operating Instructions Manual

Display representations

GB

Reset to factory state

Cleaning

Cleaning the housing

146
♦ Touch the Display control point
or press the display key
display the frequency of the radio station already set or the title number and
local time with the date.
♦ Touch the Display control point
operating mode, or press the display key
nately display the local time with the date and the world time (
♦ Touch the Display control point
mode, or press the display key
alternative display representation
The local time with the date is displayed in time/standby operating mode. The
frequency of the radio station you have set, or the title number, will be displayed
in radio or iPort operating modes.
♦ Touch and hold the
control, until the word
The device has now been reset to the factory state and the welcome message
PLEASE WAIT FOR SETTING THANKS
saved settings (radio stations, SDA alarms etc.) have now been deleted and will
need to be reset.
DANGER
Danger to life due to electric current!
► Remove the plug from the mains power socket before beginning to clean
the device.
CAUTION
Damage to the device!
► To avoid irreparable damage, ensure that no moisture penetrates into the
device whilst it is being cleaned.
■ Clean the surfaces of the device with a soft, dry cloth.
while in radio or iPort operating mode,
on the remote control in order to alternately
on the device while in time/standby
on the remote control, to alter-
on the device while in any operating
on the remote control, to switch off the
ALT OFF
briefl y appears on the display.
key on the device, or the
RESET
appears in the display
will now appear in the display
CITY
) .
key on the remote
.
. All
SIUR 10 A1