Setting The Time Format; Setting The Operating Location - Silvercrest SIUR 10 A1 Operating Instructions Manual

♦ Press the i /i
keys
display should illuminate normally again. Next, touch the
point
display will blink.
♦ Press the i /i
keys
the display should illuminate normally again.
♦ Touch the Set|OK control point
on the remote control again to save the current setting and to change to the
next menu item.

Setting the time format

You can use this function to set whether the device shows the time in 12 or 24-hour
mode.
Precondition: The device is in the clock/standby operating mode.
♦ Touch the Set|OK control point
on the remote control 13 times. The current setting for the time of day format
is shown (
♦ Touch one of the i /i
i /i
format.
♦ Touch the Set|OK control point
on the remote control again to save the current setting and to change to the
next menu item.

Setting the operating location

You can use this function to select a city or your approximate location.
Precondition: The device is in clock/standby operating mode.
♦ Touch the Set|OK control point
on the remote control 14 times.
by an abbreviation for a city name.
♦ Press the i /i
keys
or in whose vicinity, you live:
SIUR 10 A1
control points
/ on the remote control to set the hour for the time at which the
or press the i key
control points
/ on the remote control to set the minutes for the time at which
24
= 24 hour format or
control points
keys / on the remote control to switch over to the other time
control points
/ on the remote control in order to select a city name in which,
/ on the device or press then i /i
on the remote control, and the minute
/ on the device or press the i /i
on the device or press the Set OK key
on the device or press the Set OK key
12
= 12 hour format).
/ on the device or press then
on the device or press the Set OK key
on the device or press the Set OK key
LOC
will appear on the display
/ on the device or press then i /i
control
GB
, followed
135