Clock Setting; Alarm Setting - Silvercrest SUR 1 A1 Operation And Safety Notes

P Clock setting
In standby mode press
Press
time setting
Press
Press
MIN
NOTE: The product will exit time settings if no settings are made
within 5 seconds.
The setting made will be saved.
P Alarm setting
In standby mode, press
OFF, alarm source from FM radio (rAd), alarm source from Buzz (bu)
or alarm source from USB (uSb).
Under "rAd/bu/uSb" mode, press
minute.
Press
Press
MIN
Auto exit will occur after 5 seconds without pressing any button. The
setting made will be saved.
24 GB/IE/NI
or
10 11
to set the hours.
13
to set the minutes.
12
to set the hour. Press & hold to select hour quickly.
13
to set the minute. Press & hold to select minute quickly.
12
shortly to enter time setting.
15
to select from either 12 hour or 24 hour
to set Alarm 1 and select between:
10
15
, to set the hour and