Preparing The System; Setting Up The Modems - Worldcast Systems SureStreamer Quick Start Tutorial

Quick Start Tutorial: APT Mobile SureStreamer

2.2. Preparing the System

2.2.1. Setting up the Modems

The modems are pre-configured and
will automatically connect* to your
provider's network when the SIM
cards are inserted, and the battery is
connected.
The modems are located in the bag.
Unzip the all-around zipper on the
rear of the bag to access the modems.
Fold the modems out of the mold so
that you do not have to remove the
cables. If the Eth cable is unplugged,
put it back in the yellow LAN con-
nector.
*If your modem does not automatically connect to the provider's network, please refer
to the instructions in APPENDIX A.
Open the SIM card slots and insert the SIM card, as shown in the pictures.
Figure 2-3 Overview of the Micro SIM card installation
After you have inserted the SIM cards, close the flaps and put the modems back into
their slots.
In the modem settings, keep the SIM card security (PIN) deactivated (default)!

When the modems are operational, the LED indicators are green.
Figure 2-2: Shows the molded foam with the modems
on the rear of the carry bag, one modem is pulled out
Page 7