Apply The New Profile To The Mobile Surestreamer; Configure Your Apt Ip Codec In The Studio; Manage The Port Forwarding On Your Gateway Router - Worldcast Systems SureStreamer Quick Start Tutorial

Quick Start Tutorial: APT Mobile SureStreamer

4.3.5. Apply the new profile to the Mobile SureStreamer

Click on "Apply" to save and apply the new profile. It then appears under the head-
ing "Current Profile" in the profile list.
Figure 4-8 shows the completed stream configuration on the steams table

4.4. Configure your APT IP Codec in the Studio

An APT Codec with an applied SureStream license can be connected directly to the DSL
gateway in the studio.
Summary of necessary steps of configuration

Manage the Port Forwarding on your Gateway Router

Connect the Codec to your Network
Open the Codec Web GUI
Configure the Network Settings
Create a new connection profile
Create the Streams of the new Profile
Apply the new profile to the unit
4.4.1. Manage the Port Forwarding on your Gateway Router
The streams from your Mobile SureStreamer reach your Codec in the studio through
the Internet Gateway, which is your (xDSL, cable, etc.) router. If you have connected
your Codec to your network in the next step, you can configure port forwarding in the
Gateway Router.
You need to forward the ports UDP(!) 5006 to 5013 to your codec address. Depending
on the router model, this is configured in different ways, but it is always about unblock-
ing or forwarding the ports to your codec IP address(es) in the local network.
Page 19