B2.1 Iphone Wired Network Settings; B2.1.1 Configure The Lan Stream On The Luci App - Worldcast Systems SureStreamer Quick Start Tutorial

Quick Start Tutorial: APT Mobile SureStreamer

B2.1 iPhone wired Network Settings

Connect the lightning connector of the iPhone to the RJ45 adapter and switch on the
battery of the Mobile SureStreamer. The iPhone recognizes the adapter and displays a
corresponding entry in the iPhone settings (Ethernet).
Make the following settings:
Setting
IP Address
Network Mask
Gateway/Router
DNS Mode
Primary DNS
Secondary DNS

B2.1.1 Configure the LAN Stream on the LUCI APP

Open the LUCI app on your iPhone. The last stream
used appears; this is called the station. Tap the setup
icon, as shown to reach the station list.
Value
192.168.102.100
255.255.255.0
192.168.102.112
Manual
8.8.8.8
8.8.4.4
Page 48