Getting Started; Determine The Connection Mode; Surestream For Ip Audio (Chapter 4.0); Surestreamvpn (Chapter 5.0) - Worldcast Systems SureStreamer Quick Start Tutorial

Quick Start Tutorial: APT Mobile SureStreamer

3.0 Getting Started

Depending on the type of content you want to transmit with the SureStreamer, there
are two transfer modes available. The configurations for both modes are different, so
they are described in separate chapters.

3.1. Determine the Connection Mode

There are two connection modes
SureStream (IP Audio Codecs)
SureStreamVPN

3.2. SureStream for IP Audio (chapter 4.0)

Select this mode if you transmit audio, and your endpoint in the studio is an APT Audio
Codec that supports APT SureStream (by license). For this configuration, follow the in-
structions in
Figure 3-1 shows the typical application for SureStream (audio)

3.3. SureStreamVPN (chapter 5.0)

Select this mode if you transmit audio, video, or data. The SureStreamVPN connection
requires a (rackmount) SureStreamer at the endpoint. For the SureStreamVPN configu-
ration, follow the instructions in
Figure 3-2 shows an application for SureStreamVPN, connecting a venue to the studio
chapter 4.0.
chapter 5.0.
Page 11