Table of Contents
Advertisement
THE WAV SOUND SOURCE
You can add a WAV file as a sound source for all Pad Models. You can create some
great drum sounds using just the two FM Oscillators, but the WAV file enables an
additional range of sound capabilities. You can choose from 112 WAV files included
in the Drums folder of the microSD card, or you can add your own WAV files to the
card. We will talk about managing files on the microSD card later.
On the WAV screen, you can add a WAV file to a pad, remove a WAV file from a pad,
configure the WAV file settings, and access the WAV recording feature.
Add or Change a WAV File Mapping
1.
Touch the WAV graph on the Pad Dashboard to
open the WAV Screen.
2.
Touch the WAV graph area at the top of the
screen, or push the Right Arrow button while
the WAV file parameter is selected, to open the
WAV Management screen.
3.
Turn either knob to select a file or folder from
the list. Touch the ^ and Load buttons to
navigate up or down the folder tree. When the
file you want is selected, touch Load to add the
file to the pad. Any previous WAV file mapping
is removed.
Edit WAV Settings
1.
Touch the WAV graph on the Pad Dashboard to
open the WAV Screen.
2.
Turn the top knob to select a parameter, then
turn the bottom knob to set its value.
The table on the next page describes the available WAV
parameters.
P. 52 of 89
Renaming or moving
a WAV file on the
microSD card will
break any WAV file
mappings in presets.
nanobox | razzmatazz User Manual
WAV Management
The razzmatazz will
only play the first 30
seconds of longer
WAV files.
WAV Screen
Oct 14, 2022
Advertisement
Table of Contents
