Table of Contents
Advertisement
BenQ DC 1500 User's Manual
2.4. Turning on the power
2.5. Turning off the power
2.5.1. Turning off the power
2.5.2. Power Save Mode
The DC 1500 supports power save function. If the DC 1500 doesn't receive any
operation from the user for 1 minute, it will enter power save mode automatically.
However, you can press any key to wake up the DC1500 from power save mode.
2.5.3. Auto Shut Down Mode
The DC 1500 supports auto shut down function. If the DC 1500 doesn't receive
any operation from the user for 2.5 minutes, it will enter auto shut down mode
and automatically shut down instantly. To wake up the DC1500 from auto shut
down mode, you have to press the "Power" button for 2 seconds to turn on the
power again.
Press the "Power" button for 2 seconds to turn on
the power of the camera. The camera beeps once and
enters camera mode. The status of camera will appear
on the status display.
The Power indicator on the rear panel will also light
up for a few seconds at the same time.
To turn off the power, press the "Power/Mode" but-
ton for 2 seconds to turn off the power of the cam-
era. You will see the LCD screen turn blank. Then
the power is turned off.
5
Hide quick links:
Advertisement
Table of Contents
