Video Mode; Shooting Videos - BenQ DC 1500 User Manual

BenQ DC 1500 User's Manual

3.5. Video Mode

Use Video Mode to shoot videos
If the video mode is activated, you can shoot video by pressing the capture button.
The image resolution of Video mode is 320 x 240 and the video length will be limited
by the remaining memory capacity in the flash memory of DC 1500 or your memory
card. It is shown as follows:
To activate the video mode:
When the video mode is activated, the LCD screen will show icons as follows:
Video mode
Battery capacity

3.5.1. Shooting videos

Point the camera to the object you want to shoot and make the object appear on the
center of the viewfinder or the LCD screen. Then press the capture button and the
camera will beep once and start to shoot videos. The icon
will keep on flashing while the video is being shot and the recording time will also be
displayed on the LCD screen. The icon and the recording time will stop flashing when
you stop shooting videos. To stop your video shooting, press the capture button
again.
The icon flashes while
shooting videos.
Press the "Mode" button again to switch the LCD
screen frame from self-timer mode to video mode.
The camera beeps once and enters video mode, the
icon will appear on the LCD screen.
25
Estimted remaining time
you can shoot
Macro/normal
on the LCD screen
Recording time
00:06