Table of Contents
Advertisement
3.3
Getting started
3.3.1 Turning the power on / off
•
Press the [
] button until the digital camera turns on. Or, you can press the [
button when the camera is off to turn on the camera.
•
To turn the power off, press the [
3.3.2 Choosing the screen language
1. Press
MENU
, and then press [
2. Press [
] or [
] to move to
language you want.
3. Press
.
OK
3.3.3 Setting the date and time
1. Press
, and then press [
MENU
2. Press [
] or [
] to move to
3. Press [
] or [
] to select Year, Month, Day, Time, and Format fields.
•
To increase a value, press [
•
To decrease a value, press [
•
The time is displayed in 24 hour format.
4. Press
OK
.
3.3.4 Snapshot mode
3.3.4.1
Getting started with capturing images
1. Press the [
] button for more than one second to
turn on the camera.
2. Compose your image in the LCD monitor under
Snapshot Mode.
3. Press the shutter button down halfway (1), and then
press it down fully (2).
•
Pressing the shutter button down halfway
automatically focuses and adjusts the exposure.
•
The focus area frame turns green when the camera
is focused and the exposure is determined.
•
When the focus or exposure is not suitable, the frame of the focus area turns red.
• To review the last captured image, press the
to Snapshot mode.
• The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.
• To prevent your images from being blurred while pressing the shutter button, always hold
the camera steady. This is especially important when you are shooting under low lighting
conditions, under which your camera may reduce the shutter speed to ensure your
images are properly exposed.
] button again.
] / [
] to move to the Setup menu
Language
, and then press [
] / [
] to move to the Setup menu.
, and then press [
Date & Time
].
].
button. Press the
Using the Camera
.
] or
OK
to select the
] or
.
OK
Press down halfway.
1
Press down fully.
2
button to return
7
]
Advertisement
Table of Contents
