Selecting Flash Mode; Setting The Macro Mode - BenQ DC 1500 User Manual

BenQ DC 1500 User's Manual

2.7.2. Selecting flash mode

You can turn on or off the flash light according to the environment where you take
photos. This is done by pressing the "Flash/ Down" button to select the flash mode.
To select a flash mode:

2.7.3. Setting the macro mode

The DC 1500 provides macro function that allows you to capture images at a close
range (15~50 cm). You can select the macro mode by simply sliding the macro switch.
Flash off mode
When this mode is selected, the camera will not use the flash even the
environment and the object is dark.
Forced flash on mode
When this icon appears, the camera will use the flash whenever you
take photos, regardless of the environment and condition of the
object.
Automatic flash mode
The camera will detect the brightness of the environment and the
object, then use flash if necessary.
Press the "Flash/ Down" button on the
rear panel of the camera.
Press it several times and different flash
modes will scroll continuously on the LCD
screen.
1
Slide the switch to the position
2
marked
activate the macro function.
10
or to