BenQ DC 1500 User Manual page 13

BenQ DC 1500 User's Manual
Press the capture button. The camera beeps and the image will be captured and
saved to the flash memory of the camera or the SD memory card. If you take
photos with the LCD monitor, the result will be shown simultaneously.
If you did not get a satisfactory result, move the position of camera and
press the capture button again until desired result is displayed.
The remaining number of images you can take will appear on the LCD
screen.
*
Note 1: When you press the capture button, the camera beeps once and
the image will be captured and saved to the flash memory of the
camera. After the image was saved to the flash memory, the
camera beeps twice and then you may start to move your DC
1500.
*
Note 2: If you insert a SD/MMC card in your DC1500, the captured
images will be automatically saved to the SD/MMC card. On the
contrary, if you remove the SD/MMC card from your DC 1500,
then the captured images will be automatically saved to the
camera flash memory instead.
Choose a subject and press the capture button
to capture the image. The captured image will
be saved to the flash memory or the memory
card.
The remaining number of images you
can take will appear on the LCD
screen.
7