Connecting The Dc 1500 To Your Pc - BenQ DC 1500 User Manual

BenQ DC 1500 User's Manual

4.2. Connecting the DC 1500 to your PC

• Use the USB cable included in the package to connect the DC 1500 to the USB
port of your PC.
• A new USB mass-storage device found and then DC 1500 will be used as a new
removable drive under operating system.
Press the "Power" button for 2 seconds
to turn on the power of the camera.
Open the cover in the
direction shown.
After opening the cover,
you will see the USB port as
the arrow shows.
Then connect one end of the
USB cable to the USB port
on your DC 1500.
33