Loading An Sd Card; Turning The Power On/Off - BenQ DC E53 User Manual

BenQ DC 5530 User's Manual

2.3 Loading an SD Card

All images and video clips taken by the camera are stored in an SD (Secure Digital) Card. You
cannot take pictures or record movies if an SD card is not inserted.
1. Make sure the camera is off and then open the
battery/SD card cover.
2. Insert an SD Card:
If you cannot insert the card, check the
orientation.
3. Close the battery/SD card cover.
To remove the SD card, make sure the camera is off.
Open the battery/SD card cover. Press lightly on the
edge of the memory card and it will eject. Format
your SD card before use. Refer to 3.6.4.2 "Format"
on page 20.

2.4 Turning the Power On/Off

Insert the battery and an SD card before starting.
• Turning the power on
Press the POWER button for two seconds to turn the power on.
The status LED lights green and the camera is initialized.
• Turning the power off
Press the POWER button to turn the power off.
The power turns off automatically when the camera has not been used for a specified
period of time. To resume operation, press the power button again. Refer to 3.6.4.5 "Auto
Off " on page 20 for further details. After the power is turned on, it may take several
seconds to charge the flash.
4
Preparing Your DC E53 for Use