Use Your Pc To Charge Lithium Battery - BenQ DC 1500 User Manual

BenQ DC 1500 User's Manual

6.2. Use Your PC To Charge Lithium Battery

The DC 1500 has a lithium battery built in it. Before you start to use DC 1500 for the
very first time, please use the bundled USB cable to fully charge the built-in lithium
battery. It takes 2 hours to fully charge the lithium battery. Please note that when you
charge the lithium battery with camera power off, the charge indicator will light in red.
However, if you charge the lithium battery with camera power on, the charge
indicator will light in green because the indicator also performs as power indicator
(Green). Therefore, please feel comfortable if you see the charge indicator light in
green when charging the lithium battery with the camera power on.
Note:
• If the built-in lithium battery totally runs out of electricity, please use the bundled
USB cable to fully charge it. It takes no more than 2 hours to fully charge the lithium
battery with the camera power off. In addition, it takes no more than 5 hours to fully
charge the lithium battery with the camera power on.
• When the camera power is on, the charge indicator will not extinguish even if the
built-in lithium battery is fully charged. But if the charge indicator extinguishes right
after you turn off the camera power, it represents that the lithium battery is fully
charged.
• If the AAA alkaline batteries are put in the DC 1500, the AAA alkaline batteries will
be the first priority to supply the camera power.
• To prevent the AAA alkaline battery liquid from leaking, please take the AAA
alkaline batteries out of your DC 1500 if you will not use it for a very long time.
Then connect one end of the
USB cable to the USB port on
your DC 1500.
Connect the other end of the USB
cable to the USB port on the back
panel of your computer and the DC
1500 will get power from your PC.
38