Built-In Lithium Battery Usage; Connecting To Pc For Power Supply - BenQ DC 1500 User Manual

BenQ DC 1500 User's Manual
6. B -
UILT IN
Preparations
The DC 1500 has a lithium battery built in it. Before you start to use DC 1500 for the
very first time, please use the bundled USB cable to fully charge the built-in lithium
battery. It takes 2 hours to fully charge the lithium battery.
In addition, when the built-in lithium battery runs out of electricity, the camera can also
get power from the USB cable if it is connected to your PC.
6.1. Connecting the DC 1500 to PC for power supply
• If your DC 1500 runs out of electricity, use the USB cable included in the package
to connect the DC 1500 to the USB port of your PC.
L
ITHIUM BATTERY USAGE
37
Open the cover in the
direction shown.
After opening the cover,
you will see the USB port as
the arrow shows.