Self-Timer Mode; Use Self-Timer Mode To Take Photos; The Self-Timer Mode Setting Menu On Lcd Screen - BenQ DC 1500 User Manual

BenQ DC 1500 User's Manual

3.4. Self-timer Mode

3.4.1. Use Self-timer Mode to take photos

If the self-timer mode is activated in camera mode, 10 seconds after you press the
capture button, the camera will take photo automatically.
To activate the self-timer mode:
When the self-timer mode is activated, the LCD screen will show icons as
follows:
Self-timer mode
Flash status
Battery capacity
Press the capture button and the camera will start generating beep sound.
The self-timer activation indicator on the front panel will blinks
simultaneously.
After10 seconds, the camera will take photos automatically.

3.4.2. The Self-timer Mode Setting Menu on LCD screen

The content of the self-timer mode setting menu on LCD screen is the same as the
camera mode setting menu on LCD screen. Please refer to "3.1.2. The Camera
Mode Setting Menu on LCD screen" on page 12 for relative information of this
menu.
Press the "Mode" button again to switch the LCD
screen frame from burst mode to self-timer mode.
The camera beeps once and enters self-timer mode,
the icon will appear on the LCD screen.
The camera will start
generating beep sound and
the self-timer activation
indicator on the front panel
will blinks simultaneously.
24
Remaining number of photos
you can take (It depends on the
image resolution, compression
and image background.)
Image resolution
Macro/normal