Viewing Videos - BenQ DC 1500 User Manual

BenQ DC 1500 User's Manual

3.5.2. Viewing videos

The videos you shot will be saved in the flash memory of DC 1500 or your SD
memory card. To view these videos, press the "Mode" button to switch the LCD
screen frame from the video mode to play mode.
To activate the play mode:
When the play mode is activated, the LCD screen will show icons as
follows:
Play mode
Video icon
Battery capacity
You can press the up
(video), or the down
When the play mode is activated, you can select the videos by pressing the up and
down button on the rear panel, the last video taken in the camera flash memory or
the SD memory card will first appear on the LCD screen. Select the video which
you want to see, then press capture button to play it. While playing the video, the
icon
also be displayed on the LCD screen; it will stop flashing when you stop playing
videos. To stop playing your videos, press the capture button again.
The icon flashes while
playing videos.
Press the "Mode" button to switch the LCD screen
frame from video mode to play mode. The camera
beeps and enters play mode, the icon
icon
arrows on the rear panel to go to the previous image
arrow on the rear panel to go to the next image (video).
on the LCD screen will keep on flashing and the recording time will
will both appear on the LCD screen.
Total image (video)
Present image (video) number
Go to the previous image (video).
Go to the next image (video).
00:06
26
and the
Recording time