BenQ DC 1500 User Manual page 40

BenQ DC 1500 User's Manual
Note: In PC camera mode, you can use Digital Camera 1500 as a motion
Double click the newly installed DC1500 drive and you will see all the
photos you captured which are stored in the flash memory of
DC1500 or the memory card. Then you can use the software
programs which installed by the installation CD to edit or modify
your photos.
Please note that there are 2 different modes of DC1500 when
connecting to the PC.
These modes are : 1. Mass Storage Mode.
2. PC Camera Mode.
If you connect the DC 1500 to your PC when the camera power is
off, you can choose modes between mass storage mode and PC
camera mode by pressing the "Up", "Down" and "OK" buttons. If you
don't press any button, the camera will enter mass storage mode.
On the other hand, if you connect the DC 1500 to your PC when the
camera power is on, the camera will automatically enter mass storage
mode and you can press the "Menu" button to switch modes between
mass storage mode and PC camera mode.
image capturing device for your PC. You can use it for video
conferencing, capturing snapshots and so on. After connecting the
DC 1500 to your PC, you can activate the bundled software
"NetMeeting" and wait for the NetMeeting monitor frame appearing.
After the monitor frame appears, you'll see the motion images
captured by DC 1500 shown on the motion image display of the
NetMeeting monitor frame. This means you are using your DC 1500
as a PC camera.
Connect the other end of the USB
cable to the USB port on the back
panel of your computer and your
computer will install DC 1500 to
your system as a new drive
automatically.
.
34