Setting Date - BenQ DC 1500 User Manual

BenQ DC 1500 User's Manual
The menu bar appears on the bottom part of the LCD screen.
Date setting
Time setting
Save from Flash memory to SD card
Menu operations
• Press the "Menu" button to move among main items or highlight a main item on the
menu bar.
• To go to the sub-menu of a main item, press the up arrow
arrow button to highlight the item.
• To select an item, highlight the item you want to select and then press the "OK"
button.
• To exit a submenu, press the "Menu" button. After your settings finished, press this
button to return to the normal LCD preview screen.
Setup mode setting functions
There are 6 different setting functions of the setup mode: 1. Date setting; 2.
Time setting; 3. Copy from Flash memory to SD card; 4. Video out type; 5.
Format SD card; 6. Firmware version. Press "Menu" button to change different
setting functions in turns. The menu bar appears on the bottom part of the LCD
screen and the menu is shown as follows:

3.6.2.1. Setting date

This main item allows you to set correct date. Press the up and down arrow
button on the rear panel to select the right number and press the "OK" button
to change items among year, month and day.
2002/08/22
Video out type
2002/08/22
28
Firmware version
Format SD card or
camera flash memory
button or the down