Setting Time; Copy From Flash Memory To Sd Card; Video Out Type - BenQ DC 1500 User Manual

BenQ DC 1500 User's Manual

3.6.2.2. Setting time

This main item allows you to set correct time. Press the up and down arrow button
on the rear panel to select the right number and press the "OK" button to change
items among AM, PM, hour and minute.
AM 12:00

3.6.2.3. Copy from Flash memory to SD card

This main item allows you to copy data which stored in the flash memory of DC 1500
to an exterior SD card. Please note that this function is only available when the SD
card is plugged in. Highlight the icon and then press the "OK" button on the
rear panel to copy data from DC 1500 flash memory to a SD card.

3.6.2.4. Video out type

This main item allows you to set video out type to NTSC or PAL. Highlight the icon
and then press the "OK" button on the rear panel to set video out type to
NTSC or highlight the icon and then press the "OK" button to set video out
type to PAL.
29