Flavor Burst CW 194 Instructions

CW 194 KEYPAD OVERLAY - AUTO
Keypad Operations: Adjusting Ingredient Concentration,
Alternating Ingredient Timing, & Serving Size Timing
The CW 194 CC8 keypad allow the operator to adjust and set certain keypad operations.
concentration of ingredients can be adjusted to allow more or less ingredients per serving. When choosing
more than one ingredient for the serving, the operator can adjust the timing in change of ingredients from
one layer to the next. Thus, the operator determines how wide the layers of flavor will be per serving.
Also, the operator can preset the CC8 unit to automatically shut off the flow of ingredients when a particular
serving size is finished dispensing. This allows for consistent serving sizes. Follow the instructions to
adjust and set each keypad operation. Contact your local distributor for more information.
A
A ADJUSTING INGREDIENT CONCENTRATION
Press and hold the ALT TIME ADJ and #2 keys
1
simultaneously until the keypad lights flash.
To increase the ingredient concentration (ie, add more
3
ingredients to the serving), press the LARGE CUP (+)
key. To decrease the concentration (ie, for less
ingredients) press the SMALL CUP (-) key.
Press CANCEL ENTRY to set the adjustments and exit
5
the mode.
REV031008
Flavor Burst
™
Select the number of the flavor that is to be adjusted
2
(1-8).
Repeat steps 2 and 3 to adjust for each flavor that needs
4
to be adjusted for concentration.
Draw a serving to determine if the adjustment is
6
satisfactory. Repeat this process for each flavor that
needs to be adjusted.
The
pg. 1 of 3