Leckey Squiggles Stander User Manual page 10

Squiggles Stander User Manual p10
7.7 ASSEMBLE THE TRAY
To attached the arms to the tray
brackets, loosen the knob
moulding to the inside of the tray plate
so the plastic teeth mesh. Replace the
knob on the outside and secure. Repeat
on other side. Ensure both horizontal
tubes are aligned so they locate in the
tray bracket receivers.
Please be aware of a gap
on the underside of the tray
where a child could insert
their finger between the metal
bracket and the base of the
plastic tray.
A
, place the
7.8 ATTACHING THE TRAY
COVER
The tray cover attaches to the tray by
placing it over the top it will then clip into
place, to remove reverse the process.
7.9 ATTACHING THE TRAY
IN PRONE AND
SUPINE
The tray is attached to the stander by
inserting the tubes into the receiving
brackets. Once the tray is located in
position the knobs should be tightened.
The cut out of the tray should always be
facing the child. To attach the tray whilst
in the prone version, ensure that the tray
receiving tubes are at their maximum
height.
Always use caution to ensure
the childs hands or arms do
not become trapped when
inserting the tray.