Konica Minolta 1312 User Manual page 60

Chapter 5 Maintenance
Adding Toner & Replacing the Cleaning Pad (continued)
3. Insert a new cleaning pad at the rear,
then slide it to the front to install
firmly.
NOTE:
After installing a new cleaning pad,
pull it upward to check that it is
firmly installed.
If not firmly installed, soiling of copy
images and mishandled paper may
occur.
4. Close the upper unit by picking up
the stopper lever while pushing up
the upper unit slightly.
5. Close the upper unit securely, while
holding it at each side.
5-5