Konica Minolta 1312 User Manual page 31

Chapter 2 Preparations before using the copier
Adding Paper (continued)
Standard & Option Trays (continued)
4. Place copy paper in the tray.
NOTES:
• Place copy paper into the tray
with curl side up.
• Be sure paper is stacked slightly
below the hook level of the tray.
• The tray holds up to 250 sheets
of 20 lb paper. Do not load paper
above the upper paper guides.
5. Adjust Paper Guide [1] to the paper
size.
NOTE:
Use the guide knob to adjust the
paper guide.
6. Adjust Paper Guide [2] to the paper
size.
NOTE:
Use the guide knob to adjust the
paper guide.
7. Remove the size label, then refold it
so that the correct paper size will
show when it is put back into the
indicator window.
8. Push the tray into the copier until it
clicks into place inside the main
body.
2-14
Upper paper
guide
hooks
Paper
guide 1
Paper
guide 2