Table of Contents
Advertisement
Chapter 2 Preparations before using the copier
Adding Toner
This section describes the procedure for replenishing the drum unit
with toner.
CAUTION:
Keep toner cartridge away from children. Although the toner is
non-toxic, do not inhale it or allow it to enter your eyes. In case
the toner comes in contact with eyes, please consult your
physician.
Enforced Replenishment of Toner
When the toner supply of the developing unit temporarily becomes
low while copying dark originals, the copier may stop just long
enough to replenish the developing unit with toner. In this case,
code [P25] displays and the Add Toner lamp blinks until replenishing
is completed.
The toner supply is restored, and then copying starts automatically.
Add Toner Indication
When toner runs out, code [P25] flashes on the control panel in the
Print quantity/Magnification ratio window and the Add Toner lamp
blinks. Follow the steps below to replenish the developing unit with
toner.
Add Toner lamp
SELECT PAPER
NOTE:
Use the toner cartridge specified for the machine. Using a toner
cartridge of different type will cause copy quality problems.
Print quaitity/Magnification ratio window
5
Lighter Normal Da
0
CALL
STOP/CLEAR
START PRINT
2-7
Advertisement
Table of Contents
