Table of Contents
Advertisement
Chapter 2 Preparations before using the copier
Adding Toner (continued)
1. While holding the upper unit with one
hand, press the upper unit release
button to open the unit.
NOTES:
• Use care to prevent the upper
unit from popping up.
• Open the upper unit until it clicks.
2. Turn the toner cartridge a little to
both sides two or three times to
empty any remaining toner into the
developing unit.
3. Turn the toner cartridge 180°
counterclockwise and pull it out.
NOTE:
Steps 2 and 3 are not required
when you are initially setting the
copier.
4. Before inserting the new cartridge,
shake it from side to side four or five
times.
5. While removing the shield tape,
insert the new toner cartridge into the
developing unit.
NOTE:
Please insert the toner cartridge
with shield tape side up.
2-8
Upper unit
release
button
Advertisement
Table of Contents
