Table of Contents
Advertisement
Chapter 6 Troubleshooting
Error Codes and Remedies (continued)
F Code
Service Codes (F Codes) indicate machine conditions that require the
attention of your Konica service representative.
If an abnormal machine condition exists, an F Code will flash in the
Print quantity/Magnification ratio window, and the copier will remain in
the WAIT condition until power is turned off. Service Codes are listed
below:
Error code
F41, F42,
F43, F45,
F50, F52,
F54
F34, F35,
F36
F26
6-8
Meaning / Cause
Copying cannot be
performed.
Trouble occurs in the
fixing unit.
The developing unit is
not initialized correctly.
Remedy
Turn power switch
off, then turn it on. If
the code remains ,
contact your Konica
service representa-
tive.
Turn power switch
off, unplug copier
and contact your
Konica service
representative.
Initialize the devel-
oping unit again.
Advertisement
Table of Contents
