Removing The Interference Filter - Whirlpool W11440958 Technical Manual

COMPONENT ACCESS (Cont.)
8. Remove all harness connectors from the ACU board (see
Figure 7).
NOTE: Take a picture of connector locations before
removing.
4-6 Whirlpool 24" Compact Condensing Dryer
n
®
FIgure 7
Removing the Interference
Filter
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dryer or disconnect power.
2. Perform the procedure on
Panel" prior to performing the following steps.
3. Remove the harnesses from the Interference Filter (see
Figure 1).
4. Remove the four (4) T20 screws on the terminal box cover
(see Figure 2).
page 4-4, "Removing the Top
FIgure 1
Figure 2