COMPONENT ACCESS (Cont.)
1. Use a TORX
T-20
driver to remove the two (2) top hinge
®†
®
screws.
2. Use a TORX T-20 driver to remove the bottom two (2) hinge
screws.
3. Lift door slightly to remove locator pin from keyhole slot in
front panel. Remove door assembly from dryer.
†®TORX and T-20 are trademarks of Acument Intellectual Properties, LLC.
4-2
Whirlpool® and Maytag® Dryer
n
Removing the Door Assembly
To Remove the Hamper Door Assembly
(on some models)
1. Flip hinge latches up.
2. Lift door up and away from dryer.