COMPONENT ACCESS (Cont.)
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dryer or disconnect power.
2. Remove the top and side panels
3. Remove the TORX T-20 screw next to the water tank
opening (see Figure 1).
4. Disconnect the HMI harness from the HMI (see Figure 2).
4-8
Whirlpool
24" Compact Condensing Dryer
n
®
Removing the Console/User Interface
(page
4-4).
Figure 1
Figure 2
5. On the both side of the dryer disengage the tab holding the
console in place (see Figure 3).
6. Remove the console from dryer (see Figure 4).
Figure 3
Figure 4