Removing The Water Tank Housing - Whirlpool W11440958 Technical Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dryer or disconnect power.
2. Perform the procedure on
Console/User Interface" prior to performing the following
steps.
3. From the back of the dryer, disconnect the inlet and outlet
hoses from the water tank housing (see Figure 1).
4. Unclip the two front tabs on the water tank (see Figure 2).
5. Push back on the water tank housing and lift up from the
front bulkhead.

Removing the Water Tank Housing

page 4-8, "Removing the
Figure 1
Figure 2
COMPONENT ACCESS (Cont.)
6. Depress the top tab on the back of the water tank.
7. Gently push the water tank housing into the dryer and up
through the top using care not to damage the lower tab on
the back of the housing (see Figure 4).
Whirlpool 24" Compact Condensing Dryer
®
Figure 3
Figure 4
4-9
n